ATEX – Approved Online Sensor TransmitterBy ALVI
- Toxic and Combustible (CO, CO2, natural gas, Methane, LNG, PNG) sensor transmitter for online, continuous LEL / flammability or leakage detection in ambient air or ducts.
- The detector is explosion proof IECEX, ATEX certified with SIL 2 safety level and suitable for installation in hazardous area Zone 1 and Zone 2.
- The instrument can be installed at landfill application, sewage treatment plants, fertilizer industry, gas bank etc.
- It is available with LCD Display, onboard relay contacts, flashing alarm LEDs, auto diagnostic watchdog, non-intrusive calibration, with the industry standard linear analog output.
Methane, chemically known as CH4 is highly flammable, lightweight gas with LEL at STP 5% v/v.
Methane gas detector series is highly robust, industrial grade, flameproof or explosion proof gas detector for methane leakage detection or LEL monitoring. Methane is also available in form as natural gas, pressurised natural gas (PNG), liquefied natural gas (LNG).
The detector is used for online, continuous monitoring of the flammable concentration of methane in PPM, %LEL or %Vol terms in ambient air or in duct or pipeline. It is ATEX, IECEX certified with SIL 2 safety integrity level for hazardous area installation Zone 1 and 2.
The sensor transmitter offers linear, proportional analog output in industry standard current signals, over measuring range of 0-1000, 0-2000 PPM, 0 ~ 100 % LEL (lower explosive limit). The detector works on highly sensitive catalytic bead-based pellistor sensor cell, with low response time. It has unique feature of auto diagnostic watch dog with zero point tracking feature. Due to its 12-bit microprocessor based control unit, it offer high accuracy over long term. The detector is also equipped with sintered filter with flashback arrestor for enhanced safety.
It also offers optional features like inbuilt LCD display, flashing alarm LEDs, onboard potential free relay contacts (24VDC @ 1 A), RS485 serial interface with Modbus RTU communication.
- Catalytic bead based Pellistor, Electrochemical sensor cell with low flash energy
- 12-bit microprocessor control unit
- Non-intrusive one man calibration via hall effect switches
- ATEX certified explosion proof / flameproof, suitable for Zone 1, 2 gas explosion installation
- Linear, proportional analog industry standard current output
- Continuous system self-diagnosis with watch dog
- Flashback arrestor with sintered filter
- Auto Zero point tracking to zero point compensation
- SIL 2 HW TUV certified
- RS485 serial interface with Modbus RTU communication (optional)
- 1 or 3 relay output module (optional)
- System and alarm LED indicators (optional)
- Modbus RTU communication over RS485 serial interface
Methane sensor transmitter – hazardous area Zone 1, 2 with ATEX certified, flameproof
- Measuring Parameters: LEL level or leakage detection – methane, LNG, PNG, natural gas
- Sensor Technology: Catalytic bead based pellistor sensor cell
- Measuring range: 0 ~ 100 % LEL ( 0 ~ 5% v/v @ STP)
- Response time (t90): < 30 sec
- Control unit: 10 bit microprocessor based
- Warm up time: < 5 mins
- Auto zero point tracking for drift compensation
- Power supply: 24 VDC
- Ingress protection: IP65
- Enclosure: Stainless steel (for sensor cell), anti-static epoxy coated metal alloy (for transmitter)
- Output: linear, proportional 4-20mA
- Mounting: wall, duct, pipeline
- Safety integrity level: SIL 2
- Optional: LCD Display, alarm LEDs, potential free relay contacts
- Hazardous area: Zone 1, 2
- Coal mines, underground mines
- Oil & gas, refinery
- Fertilizer industry
- PNG/city gas distribution system
- PNG / LNG automobile gas filling stations
- Landfill Gases
- Sewage treatment plants (STP), effluent treatment facility
- Cryogenic application
- Chemical, petrochemical industry
- Food processing industry
- Furnace, burner application
- Gas reticulation system
For more details please contact us
You can also visit our new online product portal for various commercial and industrial applicationwww.alviautomation.in