Hydrogen Chloride Gas Sensor Transmitter

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect HCL Toxic gas.

The MC2-X-E1186-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Electrochemical HCL  sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor life time: Refer the datasheet 
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp
    • Conformity to:
      o EN 378
      o EN 45544
      o EN 50104 (for O2)
      o EN 50271
      o EN 50545
      o EN 61010-1
      o ANSI/UL 61010 1
      o CAN/CSA-C22.2 No. 61010-1
      • Duct mounting kit (accessory)

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info@alviautomation.comsales@gasalarm.com.au

Be sure, Be safe – Gas Detectors and Alarm Systems

Hydrogen Chloride Gas Detector and Monitor

Hydrogen Chloride Gas Detector and Monitor ALVI Automation (India) Pvt Ltd, a Division of ALVI Technology Pty Ltd, Australia ( Td/As Gas Alarm Systems) is pleased to introduce our world-class cutting edge Hydrogen Chloride (HCL) Gas Detector and Monitor. We are involved with designing, engineering, implementing, calibrating in the field of Gas Detection Systems, Instrumentation, Field … Continue reading “Hydrogen Chloride Gas Detector and Monitor”

MSR – ADT-53-1186 Hydrogen Chloride Gas Sensor

MSR – ADT-53-1186 Hydrogen Chloride Gas Sensor
ADT-53 series Hydrogen Chloride (HCl) sensor. HCL transmitter including digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect Hydrogen Chloride concentrations. For the detection of Hydrogen Chloride within a wide range of industrial and commercial applications.

IECEx, ATEX, SIL2 Hydrogen chloride (HCL) Gas Detector, Monitor

DESCRIPTION

Fixed PolyXeta 2 Gas Alarm Devices of the

  • PX2-1 series with Ex db protection for Zone 1 and 2
  • PX2-2 series with Ex nA protection only for Zone 2

Designed for the continuous monitoring of the ambient air to detect combustible gases and vapors for use in the hazardous areas of zones 1 and/or 2 according to Directive 2014/34/EU.

Microprocessor-based gas sensor with 4–20 mA / RS485 Modbus output signal, alarm and fault relays (all SIL2 certified) for monitoring the ambient air to detect combustible gases and vapors by means of an infrared or catalytic sensor element (Pellistor).

The calibration of sensors without an LCD display is carried out via the calibration device STL06-PGX2 or the PC soft-ware PCE06-PGX2. Sensors with LCD display have an integrated calibration routine that is started from the outside by a permanent magnet without opening the housing. In case of an alarm or failure the backlight of sensors with LCD display changes from green to red.

FEATURES:

  •  ATEX and IEC Ex certificates MSR-Electronic for electrical Ex protection
  •  Metrological test & SIL2 safety functions 4–20 mA, RS485 and relay
  •  PX2-1 for zone 1 (and also suitable for zone 2): Type “Ex db” with flame-proof enclosure
  • PX2-2 for zone 2: Type “Ex nA” with flame-proof enclosure
  • Enclosure: additional CSA certificate for Class I, Div. 1
  • Continuous monitoring
  • Microprocessor with 12-bit converter resolution
  • Self-monitoring system
  •  Easy calibration
  • Calibration service by exchanging the sensor head
  • Proportional 4–20 mA output
  • Serial interface to the control center
  • Reverse polarity protection
  • Overload protection
  • LCD display with status LEDs (optional)
  •  Alarm and fault signal relay (optional)

Our Industries:

  • Fertilizer & chemical industry
  • Oil & gas, refinery
  • Solvent and paint unit
  • Paint booth
  • Explosive manufacturing
  • Chemical
  • Manufacturing
  • Petrochemical
  • Pharmaceutical
  • Building/Commercial Automation
  • Mining, Nuclear, Steel, Defense, Power, Water, Wastewater cement, Dairy, Automobile, etc.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info@alviautomation.comsales@gasalarm.com.au

Be sure, Be safe – Gas Detectors and Alarm Systems

MSR Germany Gas controller for HCL, Hydrogen Chloride

ALVI  Automation – India (http://www.alviautomation.com)  in association with Gas Alarm Systems – Australia (http://www.gasalarm.co.au) offer MSR Germany Gas controller for HCL, Hydrogen Chloride. Hydrogen Chloride is a colorless gas that is widely used in fertilizers, chemical, pharmaceutical,  textiles and metal industries. During the operational use of Hydrogen Chloride at such facilities, there is always a possibility … Continue reading “MSR Germany Gas controller for HCL, Hydrogen Chloride”

Hydrogen Cyanide gas detection in Jewelry Industries

Jewelry manufacturers are increasingly worried about their worker’s health and safety conditions, Most jewelry companies want to prevent work-related illness and injury, and they also want to prevent pollution from their manufacturing processes, we have Smart Gas Detectors for Jewelry Manufacturing & Polishing Industries. Most of the gases/solvent acid used or generate during the Jewelry … Continue reading “Hydrogen Cyanide gas detection in Jewelry Industries”

Gas Detectors for Jewellery Manufacturing & Polishing Industries.

Jewellery manufacturers are increasingly worried about their worker’s health and safety conditions, Most jewellery companies want to prevent work-related illness and injury, and they also want to prevent pollution from their manufacturing processes, we have Smart Gas Detectors for Jewellery Manufacturing & Polishing Industries. Most of the gases/solvent acid used or generate during the Jewellery … Continue reading “Gas Detectors for Jewellery Manufacturing & Polishing Industries.”

GAS ALARM SYSTEM with Control and Monitoring Solution for Glass Plant Application

ALVI Automation/Gas Alarm Systems designed engineered PLC & HMI based gas detection, monitoring  and control solution which include: The Gas Alarm system components shall have similar features as specified below: 1. Gas controller cum display unit: It shall be digital programmable logic controller (PLC) with CPU based, based on decentralized monitoring architecture with: 5 x … Continue reading “GAS ALARM SYSTEM with Control and Monitoring Solution for Glass Plant Application”

Ethylene (C2H4) Gas Detector for Fruit Ripening Application

What is Ethylene(C2H4)? Ethylene (C2H4) is a colorless gas which is highly flammable with a Lower Explosive Limit of 2.7% in air. Measuring range: 20-2000 PPM, 0-200 PPM, 0-100% LEL C2H4 with Semiconductor and Electrochemical Sensing Technology Studies have indicated a low toxicity of ethylene and no risk to human health has been identified. It is naturally … Continue reading “Ethylene (C2H4) Gas Detector for Fruit Ripening Application”

Toxic Gases – Sensor Transmitter / Detectors / Analyzer / Monitroing – Non Ex proof

Toxic Gas detectors / Sensor Transmitters By MSR Germany Gas detector or sensor transmitter for online, continuous monitoring of all toxic gases as below. These transmitters offer industry standard analog output in current or voltage form, or digital signals like Modbus RTU with RS485 serial interface. Optionally, these are also equipped with potential free relays. … Continue reading “Toxic Gases – Sensor Transmitter / Detectors / Analyzer / Monitroing – Non Ex proof”

Toxic Gas sensor – online Transmitter / Detector / Analyzer / Monitoring – Explosion proof (ATEX, IECEx, SIL2)

Toxic gas sensors / detector / transmitters / aNALYZER / mONITORING for explosion proof hazardous area (zone 1, 2) Gas detector or sensor transmitter for online, continuous monitoring of all toxic gases as below. These transmitters offer German industry standard analog output in current or voltage form, or digital signals like Modbus RTU with RS485 serial … Continue reading “Toxic Gas sensor – online Transmitter / Detector / Analyzer / Monitoring – Explosion proof (ATEX, IECEx, SIL2)”

Toxic and Combustible Gas Leak Detection in Industries, Hotels, Hospitals and Plant.

Toxic Gas detectors / Sensor Transmitters MSR Germany Gas detector or MSR Germany  UL, SIL2, Atex, Flame proof  and CE Certified  sensor transmitter for online, continuous monitoring of all toxic gases as below. These transmitters offer industry standard analog output in current or voltage form, or digital signals like Modbus RTU with RS485 serial interface. … Continue reading “Toxic and Combustible Gas Leak Detection in Industries, Hotels, Hospitals and Plant.”

Hydrogen Chloride HCL Transmitter Sensor For commercial Application

ALVI  Automation – India (http://www.alviautomation.com)  in association with Gas Alarm Systems – Australia (http://www.gasalarm.co.au) offer Hydrogen Chloride HCL Transmitter Sensor For commercial Application. DESCRIPTION HCL transmitter including digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect hydrogen chloride concentrations. Integrated in the transmitter there is a comfortable calibration … Continue reading “Hydrogen Chloride HCL Transmitter Sensor For commercial Application”

GAS ANALYZER, DETECTOR, MONITOR, CONTROLLER LIST.

Gas Type Measuring Range  Available Design Data sheet Type Available Acetic Acid 0-100% LEL Combustible, Flammable Gas Standalone Controller MA, ADT, MC2, SPC Acetone 0-100% LEL MA, ADT, MC2, SPC Acetylene 0-100% LEL MA, ADT, MC2, SPC Air Quality CO2 + VOC MA, ADT, MC2, SPC Ammonia (NH3) 0-300 / 1000 / 35,000 ppm, 0-100% … Continue reading “GAS ANALYZER, DETECTOR, MONITOR, CONTROLLER LIST.”

MSR Hydrogen Chloride (HCL) Sensor, Transmitter, Analyzer

ALVI Automation Gas Alarm System India offer Hydrogen chloride (HCl) sensor transmitter / detector/ analyzer from MSR Electronic, Germany with following features: Measuring range: 0-20ppm , 0-50ppm, 0-200ppm Technology: Electro-chemical (galvanic) (analysis, toxic monitoring) Output: 4-20mA, 0-10V, RS485 modbus, Lon, BacNET Enclosure: IP44, IP54, IP65 Certificate: UL 61010, UL 2075, ATEX EExd, ATEX EExn, CE … Continue reading “MSR Hydrogen Chloride (HCL) Sensor, Transmitter, Analyzer”