07 June

"Best Selling" Carbon Monoxide Detector GAS-CO-300-D "on-Sale"

Smart Compact Freon and refrigerants Gas Detectors (Your protection against refrigerants)

Uncategorised

ALVI Automation a div of ALVI Technologies Pvt Ltd (Also trading as GasAlarm) is pleased to announce a revolutionary Smart Compact Freon and refrigerants Gas Detectors

Freons are heavier than air. They tend to remain stagnant and progressively replace oxygen. For optimal efficiency of your refrigerant leak detection system, refrigerant sensors should be placed under the cooling unit and linked to a gas detection display control unit. In case of leakage, the controller unit will shut down the power supply of the cooling installation.

PolyGard®2 sensors are used for leakage detection in refrigeration systems. Refrigerants are highly toxic and usually very harmful to the environment. An undesired leakage of the refrigerant has to be strictly avoided. The gas alarm systems of MSR-Electronic reliably detect any gas leaks.

First and foremost you protect human life and the refrigeration system is monitored.

All products comply with and even exceed the new European standard EN 378.

FEATURES

Digital measurement value processing
Internal function control with integrated hardware watchdog
Data / measured values in μC of the sensor unit, therefore simple exchange
uncalibrated <> calibrated
High accuracy, selectivity and reliability
Low zero point drift
Long sensor life time
Hardware & software according to SIL2 compliant development process
Easy maintenance and calibration by exchange of the sensor unit or by comfortable on-site calibration
4 – 20 mA (or 2 – 10 V) analog output with selectable signal output for special mode, fault etc.
Reverse polarity protected, overload and short-circuit proof
Housing for integration of the sensor unit
IP 65 version
Display (option)
Display with two open-collector outputs for horn (resettable) and warning lamp(option)
Conformity to
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1)
o EN 378
o EN 61508-1-3
o EN 45544-1
Duct mounting kit (accessory)