Category: Flame Detector

23 July

Butadiene Gas Detector and Monitor

Butadiene Gas Detector and Monitor 

ALVI Automation (India) Pvt Ltd, a Division of ALVI Technology Pty Ltd, Australia ( Td/As Gas Alarm Systems) is pleased to introduce our world-class cutting edge Butadiene(C4H6) Gas Detector and Monitor.

We are involved with designing, engineering, implementing, calibrating in the field of Gas Detection Systems, Instrumentation, Field devices, and Automation and several automation industries in the Australasian region including now in India. Our mission is to grow consistently using the best global technologies in products and services offered to customers. We aim to serve and maintain long term relationships by providing the most cost-effective appropriate solutions.

 

Description:

Butadiene(C4H6) detector is a highly robust, industrial grade, flameproof, or explosion-proof gas detector for Butadiene(C4H6) Gas leakage detection.

The detector is used for online, continuous monitoring of the flammable concentration of Methane Gas in PPM or %Vol terms in ambient air or duct or pipeline. It is ATEX, IECEx certified with SIL 2 safety integrity level for hazardous area installation Zone 1 and 2.

With Benefits:

  • ATEX and IEC Ex certificates MSR-Electronic for electrical Ex protection
  • Metrological test & SIL2 safety functions 4–20 mA, RS485 and relay
  • For zone 1 (and also suitable for zone 2) Type “Ex db” with flame-proof enclosure
  • For zone 2: Type “Ex nA” with flame-proof enclosure
  • Continuous monitoring
  • Microprocessor with 12-bit converter resolution
  • Self-monitoring system
  • Easy calibration
  • Calibration service by exchanging the sensor head
  • Proportional 4–20 mA output
  • Serial interface to the control centre
  • Reverse polarity protection
  • Overload protection
  • LCD with status LEDs (optional)
  • Alarm and fault signal relay (optional)

Our Industries:
Our customers come from various industries like oil/gas, chemical, manufacturing, petrochemical, pharmaceutical, building, mining, nuclear, steel, defense, power, water, wastewater, mining, cement, dairy, automobile, etc.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info@alviautomation.com, sales@gasalarm.com.au

Be sure, Be safe – Gas Detectors and Alarm System

23 July

Nonane Gas Detector and Monitor

Nonane Gas Detector and Monitor 

ALVI Automation (India) Pvt Ltd, a Division of ALVI Technology Pty Ltd, Australia ( Td/As Gas Alarm Systems) is pleased to introduce our world-class cutting edge Nonane(C9H20) Gas Detector and Monitor.

We are involved with designing, engineering, implementing, calibrating in the field of Gas Detection Systems, Instrumentation, Field devices, and Automation and several automation industries in the Australasian region including now in India. Our mission is to grow consistently using the best global technologies in products and services offered to customers. We aim to serve and maintain long term relationships by providing the most cost-effective appropriate solutions.

Description:

Nonane(C9H20) detector is a highly robust, industrial grade, flameproof, or explosion-proof gas detector for Nonane(C9H20) Gas leakage detection or PPM monitoring.

The detector is used for online, continuous monitoring of the flammable concentration of Methane Gas in PPM or %Vol terms in ambient air or duct or pipeline. It is ATEX, IECEx certified with SIL 2 safety integrity level for hazardous area installation Zone 1 and 2.

With Benefits:

  • ATEX and IEC Ex certificates MSR-Electronic for electrical Ex protection
  • Metrological test & SIL2 safety functions 4–20 mA, RS485 and relay
  • For zone 1 (and also suitable for zone 2) Type “Ex db” with flame-proof enclosure
  • For zone 2: Type “Ex nA” with flame-proof enclosure
  • Continuous monitoring
  • Microprocessor with 12-bit converter resolution
  • Self-monitoring system
  • Easy calibration
  • Calibration service by exchanging the sensor head
  • Proportional 4–20 mA output
  • Serial interface to the control centre
  • Reverse polarity protection
  • Overload protection
  • LCD with status LEDs (optional)
  • Alarm and fault signal relay (optional)

Our Industries:
Our customers come from various industries like oil/gas, chemical, manufacturing, petrochemical, pharmaceutical, building, mining, nuclear, steel, defense, power, water, wastewater, mining, cement, dairy, automobile, etc.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info@alviautomation.com, sales@gasalarm.com.au

Be sure, Be safe – Gas Detectors and Alarm System

22 July

Petrol Vapours Detector and Monitor

Petrol Vapours Detector and Monitor

ALVI Automation (India) Pvt Ltd, a Division of ALVI Technology Pty Ltd, Australia ( Td/As Gas Alarm Systems) is pleased to introduce our world-class cutting edge  Petrol Vapours Detector and Monitor.

We are involved with designing, engineering, implementing, calibrating in the field of Gas Detection Systems, Instrumentation, Field devices, and Automation and several automation industries in the Australasian region including now in India. Our mission is to grow consistently using the best global technologies in products and services offered to customers. We aim to serve and maintain long term relationships by providing the most cost-effective appropriate solutions.

Description:

Petrol Vapours detector is a highly robust, industrial grade, flameproof, or explosion-proof gas detector for Petrol Vapours Gas leakage detection or LEL monitoring.

The detector is used for online, continuous monitoring of the flammable concentration of Methane Gas in %LEL or %Vol terms in ambient air or duct or pipeline. It is ATEX, IECEx certified with SIL 2 safety integrity level for hazardous area installation Zone 1 and 2.

With Benefits:

  • ATEX and IEC Ex certificates MSR-Electronic for electrical Ex protection
  • Metrological test & SIL2 safety functions 4–20 mA, RS485 and relay
  • For zone 1 (and also suitable for zone 2) Type “Ex db” with flame-proof enclosure
  • For zone 2: Type “Ex nA” with flame-proof enclosure
  • Continuous monitoring
  • Microprocessor with 12-bit converter resolution
  • Self-monitoring system
  • Easy calibration
  • Calibration service by exchanging the sensor head
  • Proportional 4–20 mA output
  • Serial interface to the control centre
  • Reverse polarity protection
  • Overload protection
  • LCD with status LEDs (optional)
  • Alarm and fault signal relay (optional)

Our Industries:
Our customers come from various industries like oil/gas, chemical, manufacturing, petrochemical, pharmaceutical, building, mining, nuclear, steel, defense, power, water, wastewater, mining, cement, dairy, automobile, etc.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info@alviautomation.com, sales@gasalarm.com.au

Be sure, Be safe – Gas Detectors and Alarm Systems

14 September

IR3 Flame detector – Explosion proof (PESO, IEC-Ex, ATEX, FM)

PESO Approved IR3 Flame detector

 IR3 flame detect RFD-3000X is IECEx, ATEX, FM, PESO certified general fire and flame detector, based on IR3 detection technology.

It has wide view angle upto 60 meter detection range. IP67 protected with SUS 316 housing, it can be installed at any location – chemical industry, oil & gas refinery, power plants etc

Description

IR3 Flame detector – Explosion proof, contactless, ATEX, FM, IEC-Ex and PESO certified

based on IR3 spectrum detection technology, to detect fire incidence, non-contact type, Explosion proof ATEX, FM, IEC-Ex, PESO certified, RS485 serial interface, fault & output relay 
Model: RFD-3000X

pdf download icon
The IR3 Flame detector, RFD-3000X is an efficient, compact device to detect flame/fire incidence. RFD-3000X works on IR3 spectrum detection technology. As it is IP67 ingress protected with IECEx, ATEX, FM, PESO certified approval, it can be installed at all Hazardous and non-hazardous area like an electrical room, cold stores, warehouse etc, or explosion proof areas like oil rig, refinery, bottling plants, battery rooms, cracker unit.

 

Due to highly efficient detection and wide view angle, it ideal for flame detection for 90° horizontal and vertical view upto60 meter distance. It can be easily integrated with analog or digital system controller / BMS / SCADA system, with its standard analog signals, digital output and digital RS485 signals. With its unique feature, it provides fault and warning signals, in case of abnormal operation.

Explosion proof or flameproof gas sensor transmitter - ATEX, Zone 1, 2 for all toxic, flammable gas, oxygen
Being stainless steel enclosed with IP67 protection, it can be install at application area, be it coal mines, offshore platform, cold stores, refinery, power plants etc

Flame Proof Detector (1)Flame Proof Detector (2)

Flame Proof Detector (3)

IR3 flame detector (triple IR beam) – ATEX, FM, PESO, IEC-Ex explosion proof, 90 deg view, relay & RS485 output

Key Features:

  • Triple Spectrum Design – for long distance detection and high false alarm immunity.
  • Sensitivity Selection – to ensure no zone crossover detection.
  • Automatic self-diagnostic test – to assure continued reliable operation.
  • Multiple output options for maximum flexibility and compatibility.

Technical Specifications:

  • Measuring Parameters: flame (general) detection, fire incidence detection
  • Technology: IR3 technology / spectrum
  • Detection range: 0- 60 meter ( 0 – 200 ft)
  • Field of View : Horizontal: 90 °, Vertical: 90 °
  • Ambient temperature: -40 ~ +75 ° C
  • Storage temperature: -50 ~ +80 ° C
  • Power Supply: 24V DC
  • Interface: analog or relay output
  • Sensor Housing: SUS 316
  • Ingress protection: IP67
  • Approval: IECEx, ATEX, FM, PESO

Application:

  • Oil & Gas, Petrochemical, refinery
  • Chemicals
  • Cold stores
  • Pharmaceuticals, medicinal formulation

For More information please contact us or mail us at info@alviautomation.com 

Continue reading “IR3 Flame detector – Explosion proof (PESO, IEC-Ex, ATEX, FM)”

20 August

IR3 Flame Detector for Oil & gas, coal, power plants

ALVI-Group takes  pride in introducing Flame Detector for Oil & gas, coal, power plants application 

IR3 flame detector RFD-3000X is IECEx, ATEX, FM certified flame detector,  based on IR3 atex-explosion-imagedetection technology.

It has wide view angle upto 60 meter detection range.

IP66 protected with Stainless 316 housing, it can be installed at any location – chemical industry, oil & gas refinery, power plants etc

IR3 Flame detector (triple IR beam) – ATEX, FM approved for hazardous area, with RS485 interface and  relay output

 

based on IR3 spectrum detection technology, to detect fire incidence, non-contact type

Model: RFD-3000X

IR3 Flame detector, RFD-3000X is efficient, compact device to detect flame / fire incidence. RFD-300X works on IR3 spectrum detection technology. As it is IP66 ingress protected with IECEx, ATEX, FM certified approval, it can be install at non-hazardous atex-explosion-imageareas like electrical room, cold stores, warehouse etc, or explosion proof areas like oil rig, refinery, bottling plants, battery rooms, cracker unit.

Due to highly efficient detection and wide view angle, it ideal for flame detection for 90° horizontal and vertical view upto 60 meter distance. It can be easily integrated with analog or digital system controller / BMS / SCADA system, with its standard analog signals, digital output and digital RS485 signals. With its unique feature, it provides fault and warning signals, in case of abnormal operation.

Being stainless steel enclosed with IP66 protection, it can be install at application area, be it coal mines, offshore platform, cold stores, refinery, power plants etc

Flame prroof

IR3 Flame detector – online, continuous, contactless flame monitoring in explosion proof area (IEC-EX, ATEX, FM)

Continue reading “IR3 Flame Detector for Oil & gas, coal, power plants”